How to use VK3E module detailled instructions

! IMPORTANT ! YOu have to follow procedure exact as is
described below !!

1) you have to insert Flashing cable into phone connector
2) keep PWROn key pressed (If cable is Right Phone will NOT
start )
3) ONLY now connect cable into PC usb port (win will ask you
for drivers)

========================

VK200

1.Flashing Cable Pinout

Keyboard Up

12345
678910

Pin2: USB_VCC (red)
Pin3: D-      (white)
Pin4: D+      (green)
Pin6: Gnd     (black)
Pin5: Shortcut to Pin6 

2. Procedure
1) Start SW
2) Insert Flashing cable into phone connector
3) Keep PWROn key pressed
4) ONLY now connect cable into PC usb port (win will detect
USB device)
5) Start Unlock
6) After sw finish - deattach phone from cable and Enjoy

========================

VK4000

1.Flashing Cable Pinout

Keyboard Up
1.........18

Pin 1:  Gnd (black)
Pin 2:  Gnd (black)
Pin 3:  USB D+  (green)
Pin 4:  USB D-  (white)
Pin 5:  USB_VCC (RED)
Pin 10:  Gnd (black)
Pin 15: Gnd (black)

2. Procedure
1) Start SW
2) Insert Flashing cable into phone connector
3) Keep PWROn key pressed
4) ONLY now connect cable into PC usb port (win will detect
USB device)
5) Start Unlock
6) After sw finish - deattach phone from cable and Enjoy

! IMPORTANT
! For VK 4000 DO NOT RELEASE PWRON KEY UNTIL SW FINISH
JOB.!