FC HUAWEI MODULE - Update 2.0.0.0155

Update Notes

FRP Unlock added for:

  • Huawei Diego (DIG-)
  • Huawei Nova Smart (DIG-)
  • Huawei Honor 6C (DIG-)
  • Huawei GR3 2017 (DIG-)
  • Huawei MediaPad M3 Lite 10 (CPN-)
  • Huawei MediaPad M3 (BAH-)
  • Huawei Honor 6A (DLI-)
  • Huawei BARCA (VOG-)

Read bootloader code, Repair Imei, BT, Wifi, Sn, Vendor, Country added for:

  • Huawei MediaPad M3 Lite 10 (CPN-)
  • Huawei MediaPad M3 (BAH-)
  • Huawei Honor 6A (DLI-)
  • Huawei BARCA (VOG-)


At command error when repair empty board fixed

 

O V E R 400GB OF FLASH FILES ADDED TO THE SUPPORT AREA !!!

  • Pack: PACK7
  • Version: 2.0.0.0155
  • Release Date: 2015-06-01
  • Release Update: 2017-08-08

FAQs

Show All
HOW TO CONVERT CHINESSE P9 EVA-AL00 TO EVA-L19 EUROPEAN

1. BE SURE YOU HAVE PACK7 ENABLED WITH RESSURECTOR MODULE

2. CONNECT THE PHONE IN FASTBOOT MODE TO PC

3. START RESURRECTOR MODULE AND GO TO ADVANCED TAB

3. SELECT EVA-AL10_M00A056_Board Software_Global _Nonspecific_Android 6.0_EMUI 4.1_05021VRY.fcff FILE WHICH YOU PREVIOUSLY GOT FROM TEH SUPPORT AREA

4. UNCHECK 'SKIP WRITE OEMINFO'

5. PRESS UPDATE AND WAIT THE PROCESS TO FINISH

6. GET FROM THE SUPPORT AREA oeminfo_EVA-AL00_TO_EVA-L19.zip AND EXTRACT ITS CONTENTS

5. RECONNECT THE PHONE IN FASTBOOT MODE
6. IN RESURRECTOR GO TO THE ADVANCED TAB AND LOAD THE CUSTOM.txt FILE RESULTED FROM EXTRACTING oeminfo_EVA-AL00_TO_EVA-L19.zip

7. UNCHECK 'SKIP WRITE OEMINFO'

8. PRESS UPDATE AND WAIT FOR THE OPERATION TO END. BE SURE IT ENDS SUCCESFULLY

9. NOW CHECK BASIC MODE IN RESURRECTOR AND SELECT EVA-AL10_M00A056_Board Software_Global _Nonspecific_Android 6.0_EMUI 4.1_05021VRY.fcff

10. AT UPDATE.APP FILE SECTION SELECT (High_Level_Repair_Center_is_forbidden)EVA-L19_C432B386_Firmware_Poland_Czech_Republic_Nonspecific.cfs

11. PRESS UPDATE AND LET THE PROCESS TO COMPLETE

12. IF EVERYTHING WENT OK PHONE SHOULD BE ABLE TO START NOW BUT WITHOUT HAVING THE CUSTOMIZATION

13. NOW CONNECT THE PHONE IN UPGRADE MODE (WHILE THE PHOEN IS OFF KEEP PRESSING THE VOL UP+DOWN AND INSERT THE USB CABLE)

14. IN RESURRECTOR SELECT EVA-L19_C432B386_update_data_customization_hw_eu.cfs AND PRESS UPDATE

15. UPDATE SHOULD COMPLETE WITH SUCCESS

16. START FLYCAPTAIN MODULE AND ENABLE MANUFACTURER MODE ON THE PHONE

17. GO TO REPAIR UMTS TAB AND REPAIR SN, CUSTOM SN, COUNTRY AND VENDOR. AT COUNTRY PUT 'eu' (WITHOUT QUOTES) AND AT VENDOR 'hw' (WITHOUT QUOTES) AND EXECUTE THE JOB

18 ONCE TEH VALUES GET WRITTEN RESTART THE PHONE AND YOU SHOULD NOW HAVE A FULLY CONVERTED P9 EVA-AL00 TO EVA-L19

Screenshots